View SIP2210DMP-XZ-E3_3837906.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sip2210 vishay siliconix new product document number: 73441 s-52548?rev. c, 19-dec-05 www.vishay.com 1 dual output 150/300 ma low dropout regulator 2.25 v to 5.5 v input voltage range two outputs ? 150 ma and 300 ma low ground current of 48 a open drain driver output sinking 150 ma low dropout voltage of 65 mv at 100 ma err current limit thermal shutdown mlp33-10 powerpak package (fixed output) mlp44-16 powerpak package (adjustable output) mic2210 pin-for-pin replacement
cellular phones wireless modems pdas sip2210 is a dual output low dropout regulator capable of supplying 150 ma from output 1 and 300 ma from output 2. the sip2210 has the outputs independently enabled. in addition to the ldos, an open drain output has been included, which is capable of sinking 150 ma. sip2210 offers a low dropout, low ground current and extremely low noise with the addition of a bypass capacitor. protection features include err, undervoltage lockout, output current limit, and thermal shutdown. the fixed output version of sip2210 is available in a lead (pb)-free mlp33-10 powerpak package and the adjustable version is available in a lead (pb)-free mlp44-16 powerpak package. both packages ares specified to operate over the range of ?40 c to 85 c.

v out1 v out2 err drv v in en 1 bp sw en 2 gnd sip2210
sip2210 vishay siliconix new product www.vishay.com 2 document number: 73441 s-52548?rev. c, 19-dec-05
v in , v en , to gnd ?0.3v to 7 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . power dissipation mlp33-10 powerpak b 1600 mw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mlp44-16 powerpak c 1880 mw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . storage temperature ?55 to 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . thermal resistance (mlp10 powerpak) 50 c/w . . . . . . . . . . . . . . . . . . . . . notes: a. device mounted with all leads soldered or welded to pc board. b. derate 20 mw/ c above 70 c. c. derate 23.5 mw/ c above 70 c. stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extend ed periods may affect device reliability. input v oltage range 2.25 to 5.5 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . enable voltage range 0 v to 5.5 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . operating temperature range t a ?40 to 85 c . . . . . . . . . . . . . . . . . . . . . . . . operating temperature range t j ?40 to 125 c . . . . . . . . . . . . . . . . . . . . . . . test conditions unless specified limits parameter symbol v in = v out + 1 v e , c out = 1 f, i out = 100 a, t a = 25 c temp a min b typ c max b unit regulators output voltage accuracy from nominal v out room ?1 1 % output voltage accuracy full ?2 2 % output voltage temperature coefficient room 40 ppm/ c line regulation e v in =v out +1vto55v room ?0.3 0.2 0.3 line regulation e v in = v out + 1 v to 5.5 v full ?0.6 0.6 % load regulation i out = 100 a to 150 ma (ldo 1 and 2) room 0.2 1.0 % load regulation i out = 100 a to 300 ma (ldo 2) room 1.5 i out = 150 ma (ldo 1 and 2) room 120 190 dropout voltage f v drop i out = 150 ma (ldo 1 and 2) full 250 mv dropout voltage f v drop i out = 300 ma (ldo 2) room 240 340 mv i out = 300 ma (ldo 2) full 420 i out1 = i out2 = 0 a room 48 65 ground pin current i g i out1 = i out2 = 0 a full 80 a ground pin current i g i out1 = 150 ma, i out2 = 300 ma room 60 a v en 0.4 v full 2.0 sequence time delay d t seq room 70 s output voltage noise c bp = 0.01 f 30 vrms ripple rejection f = 1 khz, c out = 1 f, c bp = 10 nf room 60 db ripple rejection f = 20 khz, c out = 1 f, c bp = 10 nf room 40 db inputs en sw input voltage v il logic low full 0.6 v en, sw input voltage v ih logic high full 1.8 v en sw input current i il v il 0.6 v room ?1 0.01 1 a en, sw input current i ih v ih 1.8 v room ?1 0.01 1 a set pin threshold voltage v th (set) por = high room 1.25 v set pin current source v set = 0 v room 0.75 1.25 1.75 a
sip2210 vishay siliconix new product document number: 73441 s-52548?rev. c, 19-dec-05 www.vishay.com 3 limits test conditions unless specified v in = v out + 1 v e , c out = 1 f, i out = 100 a, t a = 25 c parameter unit max b typ c min b temp a test conditions unless specified v in = v out + 1 v e , c out = 1 f, i out = 100 a, t a = 25 c symbol error flag output (err) threshold v thl % of nominal v out2 room 90 % threshold v thh % of nominal v out2 room 96 % output voltage v ol i l = 250 a room 0.02 0.1 v leakage current i err err = high room ?1 0.01 1 a driver (dr v) output output voltage v ol i l = 150 ma full 0.2 0.6 v leakage current i drv = 0 ma, v drv = 5.5 v, sw = 0 v room ?1 0.01 1 a protection current limit i il v out1 = 0 v room 150 280 460 ma current limit i il v out2 = 0 v room 300 450 700 ma thermal shutdown temperature room 165 c thermal hysteresis room 25 c notes a. room = 25 c, full = ?40 to 85 c. b. the algebraic convention whereby the most negative value is a minimum and the most positive a maximum. c. typical values are for design aid only, not guaranteed nor subject to production testing. d. timing is measured from 90 % of ldo #1?s final value to 90 % of ldo #2?s final value. e. for higher output of the regulator pair. f. dropout voltage is defined as the input to output differential voltage at which the output voltage drops 2 % below the output voltage measured with a 1-v differential, provided that v in does not drop below 2.25 v. when v out(nom) is less than 2.25 v, the output will be in regulation when 2.25 v ? v out(nom) is greater than the dropout voltage specified.
sip2210 vishay siliconix new product www.vishay.com 4 document number: 73441 s-52548?rev. c, 19-dec-05

v in en 1 bp sw v out1 v out2 err drv gnd reference ldo #2 err comparator ldo #1 sw logic gnd sw fixed voltage v ersion v in en 1 bp sw v out1 v out2 err drv gnd reference ldo #2 err comparator ldo #1 sw logic gnd sw adjustable voltage v ersion adj 1 en 2 adj 2 en 2
10 9 8 7 v in en 1 en 2 bp v out1 v out2 err drv top view v in en 1 en 2 bp v out1 v out2 err drv bottom view sw gnd 2 3 4 1 56 sw gnd 10 9 8 7 1 2 3 4 65 exposed pad drv en 2 gnd sw adj 2 adj 1 bp err en 1 12 11 10 1 2 3 94 8765 13 14 15 16 bottom view gnd gnd nc sw v out2 v out1 v in v in powerpak mlp44?16 powerpak mlp33?10 with large pad sip2210 vishay siliconix new product document number: 73441 s-52548?rev. c, 19-dec-05 www.vishay.com 5
voltage code (x,z) adj a 1.5 f 1.6 w 1.8 g 1.85 d 1.9 y 2.0 h 2.1 e 2.5 j 2.6 k 2.7 l 2.8 m 2.85 n 2.9 o 3.0 p 3.1 q 3.2 r 3.3 s 3.4 t 3.5 u 3.6 v part number temp range package marking SIP2210DMP-XZ-E3 40 to 85 c powerpak mlp33-10 10xz sip2210dlp-aa-e3 ?40 to 85 c powerpak mlp44-16 10aa x: output 1 voltage code z: output 2 voltage code pin number mlp33-10 mlp44-16 name function 1 15, 16 v in input voltage for the power mosfets and their gate drive 2 1 en 1 enables ldo #1 output. 6 nc no connect 3 2 en 2 enables ldo #2 output. 4 3 bp bypass for noise reduction 4 adj 1 feedback connection for ldo #1 5 5 sw control for open drain output 6 7, 8 gnd ground 9 gnd sw ground for the internal n-channel mosfet switch 10 adj 2 feedback connection for ldo #2 7 11 drv open drain output 8 12 err error flag output 9 13 v out2 output of ldo #2 ? 300 ma 10 14 v out1 output of ldo #1 ? 150 ma the exposed pad on both packages must be connected externally to the gnd pin.
sip2210 vishay siliconix new product www.vishay.com 6 document number: 73441 s-52548?rev. c, 19-dec-05
dropout v oltage (mv) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 dropout characteristics?output 1 supply voltage (v) output (v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 100 a dropout characteristics?output 2 output (v) 150 ma supply voltage (v) ?10 10 30 50 70 90 110 130 150 ?40 ?20 0 20 40 60 80 100 120 140 dropout voltage?output 1 dropout voltage (mv) 0 50 100 150 200 250 300 350 ?40 ?20 0 20 40 60 80 100 120 140 temperature ( c) dropout voltage?output 2 150 ma load 0 10 20 30 40 50 60 0123456 ground current vs. supply v oltage supply voltage (v) ground current ( a) 0 10 20 30 40 50 60 0 20 40 60 80 100 120 140 output 1 and 2 with 100 a load ground current vs. output 1 current output 1 load current (ma) 100 a 300 ma temperature ( c) 300 ma load ground current ( a)
sip2210 vishay siliconix new product document number: 73441 s-52548?rev. c, 19-dec-05 www.vishay.com 7
0 10 20 30 40 50 60 0 50 100 150 200 250 300 0 10 20 30 40 50 60 ?40 ?20 0 20 40 60 80 100 120 140 160 load on both outputs ground pin current 2.780 2.785 2.790 2.795 2.800 2.805 2.810 2.815 2.820 0 25 50 75 100 125 150 output voltage vs. load current?output 1 output 1 load current (ma) output voltage (v) 3.585 3.590 3.595 3.600 3.605 3.610 3.615 0 50 100 150 200 250 300 temperature ( c) 2.760 2.770 2.780 2.790 2.800 2.810 2.820 2.830 2.840 ?40 ?20 0 20 40 60 80 100 120 140 output voltage 1 vs. t emperature 3.55 3.56 3.57 3.58 3.59 3.60 3.61 3.62 3.63 3.64 3.65 ?40 ?20 0 20 40 60 80 100 120 140 temperature ( c) 100 a load ground current vs. output 2 current output 2 load current (ma) ground current ( a) ground pin current ( a) 100 a 0 a 1 ma output voltage (v) output 2 load current (ma) output voltage vs. load current?output 2 output voltage (v) output voltage 2 vs. t emperature temperature ( c) output voltage (v) 100 a load
sip2210 vishay siliconix new product www.vishay.com 8 document number: 73441 s-52548?rev. c, 19-dec-05
0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 2.25 2.75 3.25 3.75 4.25 4.75 5.25 switch threshold vs. supply v oltage supply voltage (v) switching threshold (v) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 2.25 2.75 3.25 3.75 4.25 4.75 5.25 5.75 enable voltage threshold vs. supply v oltage supply voltage (v) drive current = 1 ma enable threshold (v)
sip2210 vishay siliconix new product document number: 73441 s-52548?rev. c, 19-dec-05 www.vishay.com 9
noise spectrum output 1 noise spectrum output 2 en 1,2 2 v/div 10 hz 1 mhz 10 hz 1 mhz v out2 1 v/div i out1 100 ma/div v out1 1 v/div 150 ma v out2 50 mv/div v out1 50 mv/div i out1 200 ma/div v out1 50 mv/div v out2 50 mv/div 300 ma c in = 1 f c out = 1 f c bp = 0.01 f v in = 5 v 10 v/sqthz 0.01 10 v/sqthz 0.01 enable sequence load transient response ldo 1 load transient response ldo2 100 s/div 5 s/div 5 s/div c in = 1 f c out = 1 f c bp = 0.01 f v in = 5 v c in = 1 f c out = 1 f c bp = 0.01 f v in = 5 v
sip2210 vishay siliconix new product www.vishay.com 10 document number: 73441 s-52548?rev. c, 19-dec-05
the sip2210 is a low dropout, low quiescent current monolithic dual linear regulator, with power-on reset and open drain driver output features. with output voltage range from 1.25 v to 5 v, the first regulator can source 150 ma and the second regulator can source 300 ma. the open drain driver has the capability to drive led?s for backlighting applications. v in v in is the input supply pin for both ldo?s. the bypass capacitor for this pin is not critical as long as the input supply has low enough source impedance. for practical circuits, a 1.0- f or larger ceramic capacitor is recommended. when the source impedance is not low enough and/or the source is several inches from the sip2210, then a larger input bypass capacitor is needed. when the source impedance, wire and trace impedance are unknown, it is recommended that an input bypass capacitor be used of a value that is equal to or greater than the output capacitor. v out1,2 (ldo outputs) the v out is the output voltage of the regulator. connect a bypass capacitor from v outx to ground. the output capacitor can be any value from 1.0 f to 10.0 f. a ceramic capacitor with x5r or x7r dielectric type is recommended for best output noise, line transient, and load transient performance. enable the en1 and en2 pins control the turning on and off of their respective regulators in the sip2210. v out of both outputs are guaranteed to be on when the enable pin voltage is equal or greater than 1.8 v. v out is guaranteed to be off when the enable pin voltage equals or is less than 0.6 v. to au? tomatically turn on v out whenever the input is applied, tie the enable pin to v in . error flag output (err) the err is an open drain output that goes low when v out2 is less than 5 % of its nominal value. as with any open drain output, an external pull up resistor is needed. the err pin is disconnected if not used. open-drain driver (drv) the sw pin a logic level input put that controls the drv pin. the switch pin is an active high input and should not be left floating. the drive pin is an open drain output able to sink 150 ma of current. bypass capacitor for low noise application and/or increase in power supply rejection ration (psrr) connect a high frequency ceramic ca? pacitor from bp to ground. a 0.01- f x5r or x7r ceramic ca? pacitor is recommended. vishay siliconix maintains worldw ide manufacturing c apability. pr oducts may be manufactured at on e of several qualified locati ons. reliability data for silicon technology and package reliability repr esent a composite of all qualified locations. for re lated documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?73441 .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of SIP2210DMP-XZ-E3

	To Download SIP2210DMP-XZ-E3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .